Warning! USB Killer PRO can kill any USB port in seconds!
USB Killer was developed with innovative new technology that has never been used before, and it all fits into what appears to be an ordinary USB memory stick. Inside the drive is an inverting DC/DC converter that charges several capacitors to negative voltage. When this voltage is reached, the converter switches off, and a transistor opens to discharge the voltage back into the USB port. This cycle runs as a continuous loop until the USB drive is inoperable, which occurs in less than 3 seconds.| USB Killer 1.0 | USB Killer 2.0 | USB Killer PRO | |
|---|---|---|---|
| Design Features | Uncased PCB | White case has an easily recognizable logo | Black plastic case which looks exactly as any regular USB stick |
| Size | 2' | smaller than regular USb stick size | Has a size of any regular USB stick |
| Noise Level | Normal operation | Loud operation | Quiet operation |
| Timing | up to 5 second | up to 3 second to damage motherboard | about 3 second to damage motherboard |
WHAT IS THE USB KILL?
The USB Kill 2.0 is a testing device created to test USB ports against power surge attacks. The USB Kill 2.0 tests your device's resistance against this attack.
- The USB Kill collects power from the USB power lines (5V, 1 - 3A) until it reaches ~ -240V, upon which it discharges the stored voltage into the USB data lines.
- This charge / discharge cycle is very rapid and happens multiple times per second.
- The process of rapid discharging will continue while the device is plugged in, or the device can no longer discharge - that is, the circuit in the host machine is broken.
The USB Kill Tester Shield is a dual purpose device:
- It allows you to test your USB Kill 2.0 without damaging your host device.
- It prevents data theft via 'juice-jacking'
- If you use a charger or USB port that is not your own - the device can steal your data while you are charging. Using a USB Kill Shield will prevent devices from having access to your data.
The USB Killer is not a toy. It is developed and sold as a testing device. While the device is shielded and tested for safe use, it remains a high-voltage device. No attempt should be made to open or modify with the device.
Sale of the device is subject to strict terms and conditions, including:
- No sale to minors
- USBKill.com accepts no responsibility for damage or losses, physical or otherwise, direct or indirect, related to the use of this device.
- Wilful destruction of third party material with this device is illegal and not condoned by USBKill.com
COMMENTS